Jump to content
Mark Dewhurst's CCMC
Sign in to follow this  
Mark Dewhurst

Mitsubishi all models

Recommended Posts

Mitsubishi Outlander

 

 

 
  • The “- – -” display must be reset while the ignition switch is “OFF”.
  • When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
  • Lightly press the multi-information meter switch until the information screen switches to service reminder display screen. Picture below.
  • Reset-oil-service-light-Mitsubishi-Outla.
  • Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash. Picture below.
  • Reset-wrench-symbol-Mitsubishi-Outlander.
  • Lightly press the multi-information meter switch while the icon is flashing to change the display from “- – -” to “CLEAR”. After this, the time until the next periodic inspection will be displayed. Picture below.
  • Reset-oil-maintenance-Mitsubishi-Outland.
  • Start the engine to verify the indicator has been reset.

Share this post


Link to post
Share on other sites

Pajero 2015 on


1 Turn ign switch OFF. Operate the trip meter to display the warning period on the odometer.
2 Press and hold the reset button for longer than 1.2 seconds. The display will flash.
3 While the display is flashing, press the reset buttion for less than 1.2 seconds. The reminder indicator is turned ON and 'CLEAR' is displayed for 3 seconds.
4 After 'CLEAR' is displayed, the wanring period to the next service is displayed.

Share this post


Link to post
Share on other sites

To turning off the Oil Life Light on 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 Mitsubishi Lancer, conform to the following instructions:

 
  • The “- – – -” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
  • Press the INFO button a few times until the information screen switches to service reminder display screen.
  • Press and hold the INFO button a few seconds to display wrench symbol and make it flash
  • When the wrench icon is flashing, press and hold INFO button until “CLEAR” is displayed on the display.
  • Start the engine to verify the indicator has been reset.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×