Mark Dewhurst

The ‘Guidelines for retrofitting seatbelts to pre-ADR vehicles’ (the Guidelines) provides advice for the installation of lap (2-point) or lap sash (3-point) seatbelts to pre-Australian Design Rule (ADR) vehicles that were not fitted with seatbelts by the vehicle’s original manufacturer. The Guideline provides general advice about acceptable installation methods, component requirements, and compliance requirements for registration in accordance with the Road Transport (Vehicle Registration) Regulation 2017. The scope of vehicles covered under this Guideline includes light vehicles (Gross Vehicle Mass of 4.5 tonnes or less) with a date of manufacture that predates any ADR related to seatbelts and seatbelt anchorage points.

LT1 Test – Beaming & Torsion - Application & Vehicle Information Form For use by vehicle owners and engineering signatories when commissioning an LT1 test (VSB 14). Instructions Complete all sections to the best of your ability. If any field is not applicable, write 'N/A'. Information is supplied at bottom of this form for descriptions and how to measure

Rule 105.03 - Light transmittance Inspection Rule 105.03 of the AIS Safety Check Standards for Light Vehicles has been updated to improve safety and align with the Road Transport (Vehicle Registration) Regulation 2017. Key updates include: - A further allowance of 5 per cent reduction in light transmittance for the front windscreen of any vehicle to 70 per cent and rejected for 65 per cent - Passenger vehicles may now meet a reduced 20 per cent light transmittance for rear windows and rejected for 15 per cent New rules for any film applied to side or rear windows that is damaged or deteriorated, and for film applied to the windscreen, with exceptions for tinted opaque bands at the top of the windscreen, provided they are above the wiper sweep or the top 10 per cent of the windscreen (whichever is greater). Please review the updated Inspection Rule and Safety Check Standards and apply them to all Safety Check inspections.

Service NSW information sheet on how to establish NSW registration.

Genuine Service Manual for the Hilux N80 series Series. Contains all service and repair information needed to fix or maintain all aspects of the vehicle.

Genuine Service Manual for the Hilux N70 series Series. Contains all service and repair information needed to fix or maintain all aspects of the vehicle.

Genuine Service Manual for the LC 100 series Series. Contains all service and repair information needed to fix or maintain all aspects of the vehicle.

Genuine Service Manual for the LC 80 series Series. Contains all service and repair information needed to fix or maintain all aspects of the vehicle.

Genuine Service Manual for the LC 70 series Series. Contains all service and repair information needed to fix or maintain all aspects of the vehicle.

Aftermarket & Genuine Service Manual for the VT to VZ Series Commodore / Calais and Ute models. Contains all service and repair information needed to fix or maintain all aspects of the vehicle. The larger 2.6G Zip file is the Genuine manual

Factory workshop manual / repair manual for the 2003 to 2008 series RA

Factory workshop manual / repair manual for the 2013 to 2017 series VF Also WN and Gen F HSV

Factory workshop manual / repair manual for the 2006 to 2013 series VE