Mark Dewhurst

The ‘Guidelines for retrofitting seatbelts to pre-ADR vehicles’ (the Guidelines) provides advice for the installation of lap (2-point) or lap sash (3-point) seatbelts to pre-Australian Design Rule (ADR) vehicles that were not fitted with seatbelts by the vehicle’s original manufacturer. The Guideline provides general advice about acceptable installation methods, component requirements, and compliance requirements for registration in accordance with the Road Transport (Vehicle Registration) Regulation 2017. The scope of vehicles covered under this Guideline includes light vehicles (Gross Vehicle Mass of 4.5 tonnes or less) with a date of manufacture that predates any ADR related to seatbelts and seatbelt anchorage points.

Light vehicle modifications
A guide to modifications requiring certification under the Vehicle Safety Compliance Certification Scheme

This Vehicle Standards Information (VSI) No. 6 is intended to help vehicle owners and
modifiers determine what modifications to vehicles up to and including 4.5 tonnes gross
vehicle mass require certification. 

Forms for completing classic conditional registration 
more information can be found on the Service NSW web page

Classis-Conditional Registration

This document is designed to give you the main rules to install and modify lighting to production vehicle under 4.5 T GVM weight, it is not an exhausted list of all rules or measurements at any point if you are unsure or have conflicting information contact the Engineer as rules change from time to time and different states can be different as well.

LT1 Test – Beaming & Torsion - Application & Vehicle Information Form
For use by vehicle owners and engineering signatories when commissioning an LT1 test (VSB 14).
Instructions
Complete all sections to the best of your ability.
If any field is not applicable, write 'N/A'.
Information is supplied at bottom of this form for descriptions and how to measure

Factory workshop manual / repair manual for the 2006 to 2017 series CG / CG2 Holden Captiva
Petrol models only

Rule 105.03 - Light transmittance
Inspection Rule 105.03 of the AIS Safety Check Standards for Light Vehicles has been updated to improve safety and align with the Road Transport (Vehicle Registration) Regulation 2017. Key updates include: - A further allowance of 5 per cent reduction in light transmittance for the front windscreen of any vehicle to 70 per cent and rejected for 65 per cent - Passenger vehicles may now meet a reduced 20 per cent light transmittance for rear windows and rejected for 15 per cent
New rules for any film applied to side or rear windows that is damaged or deteriorated, and for film applied to the windscreen, with exceptions for tinted opaque bands at the top of the windscreen, provided they are above the wiper sweep or the top 10 per cent of the windscreen (whichever is greater). Please review the updated Inspection Rule and Safety Check Standards and apply them to all Safety Check inspections.

New version .
This is the PC Software to suit the Wolf V550 ECU.
Microsoft .Net Framework is needed for this program to run but is available for download on CCMC

Service NSW information sheet on how to establish NSW registration.

This installation checklist is used by a certifier to perform LG brake testing and it can be completed in either of 2 ways
Method 1
Download the PDF and return the form by clicking on the blue Download button
Method 2
If you are a Certification Applicant select the link below to complete the online version of the form
Form will be migrated to your Evidence Portfolio after it has been assessed by the Engineer.

Online Brake Assessment Form

Checklist and information on the requirements for converting a suitable vehicle into a Motorhome or Campervan.

Templates are provided to assist customers in producing a Floor Plan
multiple templates available with access to all available 
Certification Applicants engaged in having Engineering certificates can download for free

 
 
if you aren't already a Certification Applicant click below
 

Guidelines on Seats Seatbelts and their Anchorages.
For Light vehicles under 4500kg only.

Information on 12volt and Solar (PV) systems for vehicles and trailers built after 2022 and all new installations on any vehicle.

The Load Restraint Guide is a flexible resource, designed with 6 independent modules. You can refer to each module separately,
but where necessary, the guide will direct you to additional modules for more information.

Genuine Service Manual for the Hilux N80 series Series. Contains all service and repair information needed to fix or maintain all aspects of the vehicle.

Genuine Service Manual for the Hilux N70 series Series. Contains all service and repair information needed to fix or maintain all aspects of the vehicle.

Genuine Service Manual for the LC 100 series Series. Contains all service and repair information needed to fix or maintain all aspects of the vehicle.

Genuine Service Manual for the LC 80 series Series. Contains all service and repair information needed to fix or maintain all aspects of the vehicle.

Genuine Service Manual for the LC 70 series Series. Contains all service and repair information needed to fix or maintain all aspects of the vehicle.

Aftermarket & Genuine Service Manual for the VT to VZ Series Commodore / Calais and Ute models. Contains all service and repair information needed to fix or maintain all aspects of the vehicle.
The larger 2.6G Zip file is the Genuine manual

Factory workshop manual / repair manual for the 2003 to 2008 series RA

Factory workshop manual / repair manual for the 2013 to 2017 series VF
Also WN and Gen F HSV

Navara D22 Service Manual

Factory workshop manual / repair manual for the 2006 to 2013 series VE